OXICAB Private consultation

Hyperbarics, in its finest form.

The private oxygen cabin. Walk in, sit down, and breathe at depth, in a steel vessel made to the code that pressure vessels for human occupancy answer to.

Engineering for human depth since 1963Building for pressure since 1999
Beam Duo, ML-20, in gloss white with a golden-ringed viewport, lit from beneath in a room with teak slats
Beam Duo · ML-20 · White · Golden viewport
Introducing

Beam & Beam Duo

Energy, focused and infinite. The power behind your performance and your recovery.

Beam · MO-10Beam Duo · ML-20
Beam Duo, ML-20, in gloss black, two seats visible through its golden-ringed viewport
Beam Duo · ML-20 · Black · Golden viewport
Beam Duo · ML-20

A room you walk into, sit down in, and share.

Beam Duo is a room you walk into. Two reclining seats under adjustable cove light. A film plays on the door. It is quiet enough to hear each other think.

Seats
Two, reclining
Rated
3.0 ATA
Sessions
1.3 to 2.8 ATA
Envelope
72 × 72 × 95 in
Vessel
Steel, ASME PVHO-1
Device
FDA 510(k) cleared
Oxygen
BIBS or free-flow mask
In detail

Some details are only noticed by the people who build for depth.

Class II

Held to the standard of medicine.Built to the design, materials and documentation requirements of a Class II medical device, with the FDA 510(k) clearance and certification on file to prove it.

0 ft · 1.0 ATA

The session answers to you.Pressurization, depth, lighting, film and intercom are all controlled from inside the cabin, from a panel within reach of the seat.

10 ft · 1.3 ATA

Oxygen, delivered your way.Each seat is outfitted for oxygen by built-in breathing system (BIBS) or free-flow mask, configured to the protocol.

33 ft · 2.0 ATA

Thirty-three feet beneath the sea. Built by those who have been there.Preset depths at 1.3, 1.5, 1.75, 2.0 and 2.2 ATA, engineered by a family that has worked at pressure since 1963.

Stillness

The quietest place you will ever breathe.At depth, the ocean goes still, and the cabin is engineered to match. Air moves in and out with no more than a soft whisper, and the support equipment can be housed in its own enclosure.

Redundancy

Built to keep running.The support system is engineered with backup capacity, so if one component needs service, the next carries the session.

Nameplate

Every vessel bears its mark.An ASME PVHO-1 nameplate is fixed to every Oxicab, the code written specifically for pressure vessels that hold people. Look for it. Read the Standard

Bureau Veritas

Every bolt, accounted for.Each Oxicab ships with its own Bureau Veritas certification book, tracing every component and material to its source. Bureau Veritas has classed ships since 1828 and today certifies offshore platforms, power plants and pressure equipment worldwide.

The Maker

Two families. One pressure.

One family has spent sixty years learning what depth does to the body. The other has spent twenty-seven building vessels that bring depth to the surface. Oxicab is where they meet.

1963

Depth

The Betts family went down to pressure first. Ed Betts has been diving since 1963 and built the discipline of breathing gas at depth into something that can be taught.

  1. 1968Island Scuba Centers opens in Freeport, New York.
  2. 1988ANDI is founded to standardize breathing gas and its training.
  3. 2024The fifth edition of the ANDI Hyperbaric Chamber Operator textbook.
  4. 3,300+Operators and divers certified by Ed Betts personally.
1999

The Vessel

The Oxicab family brought pressure to the person. A family workshop in Lima has built hyperbaric chambers since 1999, inspected through manufacture by Bureau Veritas.

  1. 30+Models, from single-seat cubes to multiplace suites.
  2. 6 ATADiver recompression systems at the top of the range.
  3. 2008The Presidential line is cleared by the FDA under K081506.
  4. 2026Beam and Beam Duo, the new generation of the Executive Cube® and the ML-20, finished for the residence and the private clinic.
Diving and hyperbarics are one science, seen from opposite sides.

A diver descends to meet pressure. A hyperbaric cabin brings pressure to the person. Both depend on the same gas, the same vessels and the same training. That is why these two families were always going to meet, and why the Beam feels inevitable.

From the workshop

Before the Beam

Chambers for divers, hospitals, clinics and animals, built in Lima for more than a quarter century.

  • Steel pressure manifold with valves labeled 1.6, 1.8 and 2.0 ATAMO-10Pressure manifold
  • Interior of a multiplace chamber lined with seats and viewportsML-60CMultiplace interior
  • Operator console with gauges, intercom and monitorML-60COperator console
  • Chamber room with racks of breathing-gas cylindersGasSupply room
  • Control panel with large pressure gauges and numbered controlsMO-13Control panel
  • A single reclining seat inside an Executive CubeMO-10Executive Cube® interior
  • Clinic floor with two lay-down monoplace chambersMO-13Clinic floor
  • A chamber installed in a containerized truck bodyMobileContainerized chamber
  • A dog standing inside an open veterinary chamberMVCompanion animal
  • A camel being led into a large veterinary chamberMV-CAM-VCamel
  • Multiplace chamber interior with seats and demand masksMLDemand masks
  • A lay-down monoplace chamber with its control panelMO-13Presidential
The Collection

A range, each built to the same code.

Every Oxicab is steel, built to ASME PVHO-1, and rated to at least 3.0 ATA.

Beam Duo in gloss white
White
Beam Duo in gloss black
Black
ML-20

Beam Duo

The walk-in cabin for two. Finished in gloss white or gloss black, with a golden-ringed viewport and a lit plinth.

Seats
2
Rated
3.0 ATA
Envelope
72 × 72 × 95 in
MO-10 · Executive Cube®

Beam

The private seated cube for one, or for a parent and child. Built in three widths and two lengths, so it fits the room it is meant for, from a 35 in body that clears a standard doorway to the 52 in wide extended cube.

Seats
1
Widths
35 · 40 · 52 in
Rated
3.0 ATA
Beam, MO-10 Executive Cube®, in gloss white with a golden-ringed viewport, lit from beneath
Beam · MO-10 Executive Cube® · White · Golden viewport
The Presidential MO-13, a lay-down monoplace chamber with its control panel
MO-13

Presidential

The lay-down suite in a seamless acrylic tube, with a telescoping gurney. Ambient air or 100% oxygen, in 32 in and 40 in diameters.

Position
Lay down
Clearance
K081506
Rated
3.0 ATA
Interior of a multiplace chamber lined with seats and viewports
ML-40 to ML-200

Multiplace

Single or double-lock suites for two to twenty-four, with a tender, demand masks, four-camera monitoring and automatic fire suppression. Further configurations are built around your use, from mounted fitness equipment to custom seating.

Seats
2 to 24
Locks
1 or 2
Rated
3.0 ATA
A diver recompression chamber installed in a containerized unit
MZ-40 to MZ-100

Diver Recompression

The range at its deepest. Recompression systems for diving operations, containerized or fixed.

Seats
4 to 10
Install
Fixed · Mobile
Rated
6.0 ATA

Full technical offers and specification documentation for any unit are available on request. Request documentation

Multiplace

A larger room, finished to your vision.

Our team configures the seating, lighting, finishes and layout of every multiplace suite around the people who will use it, and delivers it ready for the first session.

Interior of a white multiplace Oxicab, a long arched cabin with a lit ceiling channel, oxygen stations along both walls and round viewports on each side
Multiplace interior · Shown unfurnished
Made to measure

Every Oxicab is specified for the room, the people and the schedule it will serve.

Plan view of the Beam, MO-10, in three widths, 35, 40 and 52 inches, each 90 inches long. The L5 option adds 5 inches of length to the 40 and 52 inch cubes. 90 IN LONG MO-10-35 MO-10-40 MO-10-52 35 IN WIDE 40 IN WIDE 52 IN WIDE L5 +5 IN LONG L5 +5 IN LONG
Beam · MO-10 Executive Cube® · Plan view, door at left · To scale
MO-10 · Executive Cube®

Configuring the Beam

Width

Three widths, chosen for the doorway and the guest.

The 35 in cube clears a standard doorway, so it can be placed almost anywhere. The 40 in cube adds room to settle in. The 52 in cube is the most generous and accepts the 38 in domed viewport. Every width seats a parent and child together.

Length

L5 adds five inches.

The extended L5 body takes the cube from 90 to 95 in for taller guests and a deeper recline, with a side viewport.

Finish

Your finish, your light.

Gloss white or gloss black, a lit plinth, and viewports from 10 in to the 38 in dome. Seating, wheelchair access and interior lighting are specified with you.

Support system

Sized to the sessions you will run.

Compressors, oxygen concentrators and storage are matched to how many sessions you run each day, and they grow with you. Redundancy is built in, so a single component in service does not stop your schedule.

AirQuiet compressor for sessions from 1.3 to 2.8 ATA.
OxygenFlexible concentrator and storage options, sized to the needs of the setting, for oxygen by BIBS or free-flow mask.
Ready to TreatThe full system, installed, commissioned and certified, with a five-year warranty.
The Standard

Every pressure vessel is built to a code. Ours is the one written for people.

Five questions worth asking of any chamber, and our answer to each.

I

Which ASME?

ASME Section VIII governs general pressure vessels: air tanks, boilers, industrial equipment. ASME PVHO-1 governs pressure vessels that hold people. Every Oxicab is built to ASME PVHO-1 and carries the nameplate to show it.

II

Which K-number, and does it name this model?

An FDA clearance covers specific devices. Ask for the K-number and the device named on the letter. We will show you ours.

III

Registered, or cleared?

Registration lists a company with the FDA. Clearance covers a device. We show both, labeled for what they are.

IV

Is the certificate current?

A certificate is only as good as its date. Every certificate we share shows its issuing body, its number and its expiry.

V

Who certifies the people who run it?

Your operators are trained and certified by ANDI, the agency founded in 1988 by the engineer who designs the system, using the textbook he wrote.

Every claim is backed by documentation.

Ownership

Commissioned, placed and certified by one team.

Your cabin, its oxygen system, its installation and the people who run it all come from the same hands, backed by a five-year warranty.

  1. Consultation

    A private conversation about your setting, your guests and how the cabin will be used.

  2. Site assessment

    Access, power, oxygen and code requirements, reviewed before anything is built.

  3. Configuration

    Viewports, livery, seating and finish, specified to the room.

  4. Placement

    Factory installation and commissioning, typically within four days on site.

  5. Certification

    Your operators certified by ANDI, with service from New York for the life of the cabin.

One team, from the first conversation to the thousandth session.

The oxygen system is engineered by the same family that introduced oxygen concentrators to diving in 1988: concentrators, an analyzer and storage, so there is no liquid oxygen to store or handle. Redundancy is engineered into the support system to keep it running. The vessel is built for a working life of fifty years and more.

Settings

Engineered for the highest performance, wherever it lives.

Residence

Share the session.

Room for two, built for decades. Sit together, talk, and watch a film on the door.

Clinic

Two clients. One session.

A cleared Class II device, every document in your binder before install day, and staff certified by ANDI.

Team

Recover side by side.

Hand your team physician the nameplate. Certified operators on your own staff.

Hospitality

A private oxygen suite for two.

A guest experience your fire marshal can sign off, from site plan to first guest.

More than 400 systems installed worldwide

Our clients prefer not to be named. Their facilities teams prefer our paperwork.

Private residences · Hospitals and clinics · Government and allied military
References are shared in private consultation
Standards and certifications
Bureau Veritas Icontec ISO 13485 certification Icontec ISO 9001 certification FDA NFPA ASME DIGEMID, Ministry of Health of Peru
  • ASME PVHO-1-2019Safety Standard for Pressure Vessels for Human Occupancy
  • ASME BPVC Section VIII, Div. 1Boiler and Pressure Vessel Code, Pressure Vessels
  • ASME BPVC Section IXWelding Qualifications and Procedures
  • NFPA 99, Chapter 19Health Care Facilities, hyperbaric facilities
  • FDA 21 CFR Part 820Good Manufacturing Practices for Class II medical devices
  • ISO 9001 · IQNetQuality Management System
  • ISO 13485 · IQNetQuality Management System for medical devices
  • DIGEMID Sanitary RegistrationMinistry of Health of Peru
  • DIGEMID Certificate of Free SaleMinistry of Health of Peru
Private Consultation

Every Oxicab begins with a conversation.

Tell us where the cabin will live. A member of our team will reply within one business day.

Private viewings, by appointment
Freeport, New YorkLong Island Hyperbaric
Fort Lauderdale, FloridaHyperbaricsRx
Austin, TexasBeam Hyperbarics
The setting